hi kids, this is your dad, huahuanjayy wkwkwk, Nuenomaru the handsome is back in action.
Okay, this time your dad is going to write a tutorial WLAN Optimization with Ruijie Cloud. This lesson primarily covered the basic theory of wireless network optimization and how to use the one-click optimization feature on the Cloud Pro platform.
Since the wireless network relies on high-frequency radio waves for data transmission, factors such as transmission distance, channel planning, and interference can significantly impact the quality of the wireless signal and may even cause network failures.
Typical issues in wireless networks include:
*Weak signal: Blind spots, AP offline, Connect to APs slowly, cannot Connect to AP
*Internet access jitter: Broadcast message flooding, AP interferes strongly with each other, AP performance insufficient
*Poor roaming experience: remote association(frequently connecting to distant APs), Roaming viscosity (fail to switch to a strong signal)
In WLANs, the surrounding environment affects the running of APs. When the channels of two neighboring APs overlap, the signals of an AP will be interfered with if the power of another AP is too high. To ensure user experience, conduct channel optimization to reduce air interface interference.
The Power parameter controls the power for transmitting data frames and is used to optimize the transmission rate and control the interference scope. While maintaining the original throughput, decrease the local power to reduce interference on neighboring APs.
Wi-Fi Optimization is an intelligent and automatic RF optimization scheme tailored for complicated scenarios with multiple APs.
After Wi-Fi Optimization collects spatial information, including SSID, channel, signal strength and client status, it analyses information through the intelligent algorithm to provide the optimal network solution (channel and power planning for each AP), and automatically adjusts the configuration of APs in the network.
*Wi-Fi Optimization function entry: Project > AI Networking > AI Optimization
*The user does not need any additional configuration except click Optimize Now
*APs that require network optimization need to be online in the Cloud
*Select Optimization Mode:
*Deep optimization : During optimization, external interference sources are identified and analyzed to compute the optimal configuration. It surpasses quick optimization in effectiveness but takes more time.
After completing the AI WIO process, Cloud Pro will generate a detailed report that allows you to view the comparison of network status before and after optimization.
If you find the AI WIO is not suitable, you can still adjust the radio planning manually.
Hahaha alright, that’s a wrap for today’s article—my coffee’s gone, so that’s my cue to stop typing.
Let’s end this with a Bismillah at the start and an Alhamdulillah at the finish. Catch you next time, tech gembelers!.
./Nuenomaru
